Dell PowerConnect W-7200 Series Reference Manual page 1040

Parameter
Encapsulation
loopback...
Configured
Negotiated
MTU bytes
BW is...
Last clearing of "show interface
counters"
This port is...
POE status of the port is...
#show interface fastethernet 1/0 access-group
FE 1/0:
Port-Vlan Session ACL
---------------------
SessionACL
----------
The output of this command includes the following parameters:
Parameter
SessionACL
Vlan
Status
#show interface fastethernet 1/0 counters
Port
FE1/0
Port
FE1/0
The output of this command includes the following parameters:
Parameter
Port
1040 | show interface fastethernet
Vlan Status
---- ------
Description
Session ACL name.
VLAN number.
ACL status.
InOctets InUcastPkts
196310364 460655
OutOctets OutUcastPkts
97074242 191401
Description
Port number.
Description
Encapsulation method assigned to this port.
Displays whether or not loopback is set.
Configured transfer operation and speed.
Negotiated transfer operation and speed.
MTU size of the specified port in bytes.
Bandwidth of the link.
Time since "show interface counters" was cleared.
Below the time, all current counters related to the specified port are
listed.
Whether or not this port is trusted.
The POE status of the specified port.
InMcastPkts
661932
OutMcastPkts
3
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
InBcastPkts
15
OutBcastPkts
72