Table of Contents
Advertisement
show switches
show switches [all | state {complete | incomplete | inprogress | required} | summary ]
Description
Displays the details of switches connected to the master controller, including the master controller itself.
Syntax
Parameter
all
state
summary
Example
The output of this command shows that there is a single local controller connected to the master controller.
(host) # show switches all
All Switches
------------
IP Address
Name
Config Sync Time (sec)
----------
----
----------------------
10.16.12.1
r-wing-94
0192.0.2.12 CorpA2400 Building1.floor1
0
Command History
Version
ArubaOS 3.0
ArubaOS 6.0
Command Information
Platforms
All platforms
1280 | show switches
Description
List of all switches.
Configuration status of all switches.
Status of all switches connected to the master.
Location
Type
--------
----
Building1.floor1
master
master 6.0.0.0_13782 up
Description
Command introduced.
The version column in the output of this command was expanded to include both the
version and the build number for controllers running ArubaOS 6.0 and later releases.
Licensing
Base operating system
Version
Status
------- ------
6.0.0.0_13782 up
Command Mode
Config or Enable mode on master or local
controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Configuration State
-------------------
UPDATE SUCCESSFUL
UPDATE SUCCESSFUL
Advertisement
Table of Contents
