Dell PowerConnect W-7200 Series Reference Manual page 547

service
service [dhcp] [network-storage] [print-server]
Description
This command enables the DHCP server on the controller.
Syntax
Parameter
dhcp
network-storage
print-server
Usage Guidelines
You can enable and configure DHCP, DHCPv6, network-storage or print server in the controller to provide the
following:
DHCP: IP addresses to wireless clients if an external DHCP server is not available.
l
Network-storage: To provide access to the storage devices attached to the controller.
l
Printer-server: To provide access to printers attached to the controller.
l
Example
The following command enables the DHCP server in the controller:
(host) (config) #service dhcp
The following command enables the NAS services in the controller:
(host) (config) #service network-storage
The following command enables the printer services in the controller:
(host) (config) #service print-server
Command History
The DHCP command was introduced in ArubaOS 3.0.
The network-storage and print-server options was introduced in ArubaOS 3.4
Command Information
Platforms
All platforms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Enables the DHCP server
Enables the NAS service
Enables the printer service
Licensing
Base operating system
Default
disabled
disabled
disabled
Command Mode
Config mode on master controllers
service | 547