Dell PowerConnect W-7200 Series Reference Manual page 1160

show tunneled-node config
show tunneled-node config
Description
Displays wired tunneled node configuration details.
Syntax
No parameters.
Example
The output of this command shows the tunneled node configuration details.
(host) # show tunneled-node config
Tunneled Node:Enabled
Tunneled Node Server:4.4.4.1
Tunnel Loop Prevention:Disabled
Tunnel Node MTU:5000
Command History
Release
ArubaOS 3.0
ArubaOS 6.1
Command Information
Platforms
All platforms
1160 | show tunneled-node config
Modification
Command introduced
The command name was changed to show tunneled-node config.
Licensing
Base operating system
Command Mode
Config or Enable mode on master or local
controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide