Dell PowerConnect W-7200 Series Reference Manual page 527

rf dot11g-radio-profile
rf dot11g-radio-profile <profile>
am-scan-profile <profile-name>
arm-profile <profile>
beacon-period <milliseconds>
beacon-regulate
cap-reg-eirp <cap-reg-eirp>
cell-size-reduction <cell-size-reduction>
channel <num|num+|num->
channel-reuse {static|dynamic|disable}
channel-reuse-threshold
clone <profile>
csa
csa-count <number>
disable-arm-wids-function
dot11b-protection
dot11h
high-throughput-enable
ht-radio-profile <profile>
interference-immunity
maximum-distance <maximum-distance>
mgmt-frame-throttle-interval <seconds>
mgmt-frame-throttle-limit <number>
mode {ap-mode|am-mode|spectrum-mode}
no ...
radio-enable
slb-mode channel|radio
slb-threshold
slb-update-interval <secs>
spectrum-load-bal-domain
spectrum-load-balancing
spectrum-monitoring
spectrum-profile
tpc-power <tpc-power>
tx-power <dBm>
Description
This command configures AP radio settings for the 2.4 GHz frequency band, including the Adaptive Radio
Management (ARM) profile and the high-throughput (802.11n) radio profile.
Syntax
Parameter
<profile>
am-scan-profile <profile-
name>
arm-profile
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Name of this instance of the profile. The name
must be 1-63 characters.
Configure an Air Monitor (AM) scanning profile.
Configures Adaptive Radio Management (ARM)
feature. See "rf arm-profile" on page
Range
—
—
—
513.
rf dot11g-radio-profile | 527
Default
"default"
—
"default"