Parameter
Name
Untrusted Vlan(s)
#show interface fastethernet 1/1 xsec
xsec vlan 7 is ACTIVE
The output of this command includes the following parameters:
Parameter
xsec vlan 7 is ACTIVE
Command History
This command was introduced in ArubaOS 3.0.
Command Information
Platforms
All platforms
1042 | show interface fastethernet
Description
Name of the specified port.
List of untrusted VLANs.
Description
This states that xsec is active on the specified port as well as the associated VLAN.
Licensing
Base operating system
Command Mode
Enable or config mode on master controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide