show vpdn pptp configuration
show vpdn pptp configuration
Description
Displays the PPTP configuration on the controller.
Syntax
No parameters.
Example
The output of this command shows the L2TP tunnel configuration.
(host) # show vpdn pptp configuration
Enabled
Hello timeout: 30 seconds
DNS primary server: 10.15.1.1
DNS secondary server: 10.15.1.200
WINS primary server: 0.0.0.0
WINS secondary server: 0.0.0.0
PPP client authentication methods:
MSCHAP
MSCHAPv2
MPPE Configuration
128 bit encryption enabled
IP LOCAL POOLS
Command History
This command was available in ArubaOS 3.0
Command Information
Platforms
All platforms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Licensing
Base operating system
Command Mode
Config or Enable mode on master or local
controllers
show vpdn pptp configuration | 1341