show rft result
show rft result all|{trans-id <trans-id>}
Description
Show the results of an RF test.
Syntax
Parameter
all
trans-id <trans-id>
Usage guidelines
The
rft
command is used for RF troubleshooting, and should only be used under the supervision of Dell technical
support.
Related Commands
To view a list of the most recent transaction IDs for each test type, use the command
Command History
This command was available in ArubaOS 3.0.
Command Information
Platforms
All platforms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Show the most recent test result for each test type (antenna-connectivity, link-quality or
raw).
Each RF test is assigned a transaction ID. Include the trans-id <trans-id> parameters to show
the test result for a specific transaction ID.
Licensing
Base operating system
show rft
Command Mode
Enable and Config mode on local and master
controllers
transactions.
show rft result | 1249