Dell PowerConnect W-7200 Series Reference Manual page 1019

Parameter
Detect AP Impersonation
Protect from AP Impersonation
Beacon Diff Threshold
Beacon Increase Wait Time
Detect AP Spoofing
Detect Beacon Wrong Channel
Beacon Wrong Channel Detection
Quiet Time
Detect Hotspotter Attack
Hotspotter Quiet Time
Related Commands
Configure IDS impersonation profiles using the command
Command History
Version
ArubaOS 3.0
ArubaOS 6.0
Command Information
Platforms
Available on all platforms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Shows of the profile has enabled or disabled detection of AP
impersonation.
Shows if AP impersonation is enabled or disabled for the profile. When
AP impersonation is detected, both the legitimate and impersonating AP
are disabled using a denial of service attack.
Percentage increase in beacon rates that triggers an AP impersonation
event.
Time, in seconds, after the beacon difference threshold is crossed
before an AP impersonation event is generated.
AP Spoofing detection is enabled
Disable detection of beacons advertising the incorrect channel
Wait 90 seconds after detecting a beacon with the wrong channel after
which the check can be resumed.
Enable detection of the Hotspotter attack to lure away valid clients.
Wait 90 seconds after detecting an attempt to Use the Hotspotter tool
against clients.
Description
Command Introduced
Refreshed show output
Licensing
Requires the RFprotect license
ids impersonation-profile.
Command Mode
Config mode on master controllers
show ids impersonation-profile | 1019