Dell PowerConnect W-7200 Series Reference Manual page 1281

show switchinfo
show switchinfo
Description
Displays the latest and complete summary of controller details including role, last configuration change, hostname,
reason for last reboot.
Syntax
No parameters.
Example
The output of this command lists all controllers connected to the master controller including the master controller.
(host) # show switchinfo
Hostname is Techpubs
Console Baudrate: 115200
Location not configured
System Time:Tue Nov 27 16:22:14 PST 2012
Compiled on 2012-11-26 at 17:06:31 PST (build 36290) by p4build
ROM: System Bootstrap, Version CPBoot 1.2.0.9 (build 35873)
Built: 2012-10-24 13:51:09
Built by: p4build@re_client_35873
Switch uptime is 9 hours 34 minutes 3 seconds
Reboot Cause: User reboot.
Built: 2012-10-24 13:51:0
Built by: p4build@re_client_35873
Internet address is 172.16.0.254
Routing interface is enable, Forwarding mode is enable
Directed broadcast is disabled
Encapsulation 802, loopback not set
Last clearing of "show interface" counters 0 day 9 hr 34 min 3 sec
link status last changed 0 day 9 hr 34 min 3 sec
Proxy Arp is disabled for the Interface
switchrole:master
Configuration unchanged since last save
Crash information available.
Command History
This command was available in ArubaOS 3.0
Command Information
Platforms
All platforms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
255.255.255.0
Licensing
Base operating system
Command Mode
Config or Enable mode on master or local
controllers
show switchinfo | 1281