Dell PowerConnect W-7200 Series Reference Manual page 799

Command History
Version
ArubaOS 3.0
ArubaOS 3.4.1
Command Information
Platforms
All platforms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Modification
Command introduced
The names parameter was introduced. The output of this command was also modified to
include the Rate Tx/Rx column.
Licensing
This show command is available in
the base operating system.
Commands to configure the mesh
feature require the Mesh license.
Command Mode
Enable or Config mode on master controllers
show ap mesh neighbors | 799