Table of Contents
Advertisement
The output of the show aaa state configuration command includes the following parameters:
Parameter
Switch IP
Master IP
Switch Role
Current/Max/Total IPv4 Users
Current/Max/Total IPv6 Users
Current/Max/Total Users
Current/Max/Total Stations
Captive Portal Users
802.1x Users
VPN Users
MAC Users
Stateful 802.1x Users
Tunneled users
Configured user roles
Configured session ACL
Configured destinations
Configured services
Configured Auth servers
Auth server in service
Radius server timeouts
Web
626 | show aaa state configuration
Description
IP address of the local controller.
IP address of the master controller.
Role assigned to the controller on which you issued the show aaa state
command.
Current number of IPv4 users on the controller/Maximum number of IPv4 users
that can be assigned to the controller at any time/Total number of IPv4 users that
have been assigned to the controller since the last controller reboot.
Current number of IPv6 users on the controller/Maximum number of IPv6 users
that can be assigned to the controller at any time/Total number of IPv6 users that
have been assigned to the controller since the last controller reboot.
Current number of users on the controller/Maximum number of users that can be
assigned to the controller at any time/Total number of users that have been
assigned to the controller since the last controller reboot.
Current number of stations registered with the controller/Maximum number of
stations that can be registered with the controller at any time/Total number of
stations that have registered the controller since the last controller reboot.
Number of current users authenticated via captive portal.
Number of current users authenticated via 802.1X authentication.
Number of current users authenticated via VPN authentication.
Number of current users authenticated via MAC authentication.
Number of current users authenticated via stateful 802.1X authentication.
Number of stations in tunneled forwarding mode, where 802.11 frames are
tunneled to the controller using generic routing encapsulation (GRE).
Number of configured user roles.
Number of configured session ACLs.
Number of destinations configured using the
Number of service aliases configured using the
Number of configured authentication servers.
Number of authentication servers currently in service.
Number of times the RADIUS server did not respond to the authentication
request.
Total number of captive portal authentications or authentication failures since
the last controller reset.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
netdestination
command.
netservice
command.
Advertisement
Table of Contents
