Dell PowerConnect W-7200 Series Reference Manual page 886

Channel Noise Floor(dBm)
Max Interference(dBm)
------- ----------------
---------------------
149 -91
-71
153 -63
-58
157 -92
-60
161 -94
-70
165 -93
-69
149+ -60
-58
157+ -89
-60
The output of this command includes the following information:
Column
Channel
Noise Floor (dBm)
Max AP Signal (dBm)
Max AP SSID
Max AP BSSID
ACI (dBm)
Max Interference Power
(dBm)
Command History
Introduced in ArubaOS 6.0.
Command Information
Platforms
All platforms
886 | show ap spectrum interference-power
Max AP Signal(dBm) Max AP SSID
------------------ -----------
-40 ethersphere-wpa2
-42 guest
-48 alpha
-39 00:24:6C:C0:15:EB
-26 sw-jfb-attack
-40 ethersphere-wpa2
-39 00:24:6C:C0:15:EB
Description
An 802.11a or 802.11g radio channel.
Current noise floor recorded on the channel.
Power level of the AP on the channel with the highest signal power.
SSID of the AP on the channel with the highest signal power.
BSSID of the AP on the channel with the highest signal power.
Adjacent channel interference level detected by the spectrum device.
Signal strength of the non-Wi-Fi device that has the highest signal strength.
Licensing
Base operating system
Max AP BSSID
------------
00:24:6c:80:7b:c9
00:1a:1e:87:c1:90
00:1a:1e:50:01:30
00:24:6c:81:57:c8
00:1a:1e:9b:1d:c8
00:24:6c:80:7b:c9
00:24:6c:81:57:c8
Command Mode
Enable or Config mode on master or local
controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
ACI(dBm)
--------
-77
-63
-74
-61
-74
-0
-0