Parameter
or
rows
sort
start
Example
Issue this command to display a global user count. The output of this command is split into two tables in this
document, however it appears in one table in the CLI.
(host) (config) show user role employee
Global Users
-----
IP
name
----------
----
192.168.160.1
AP63
10.100.105.100
wlanAP
10.100.105.102
AP98
10.100.105.97
AP98
10.100.105.109
AP09
users
-----
Roaming
Essid Bssid Phy Profile
------- ---------------- -------
Associated
wirelessint-wpa2 00:1a:1e:85:d3:b1 a-HT
Associated wirelessint-wpa2 00:1a:1e:6f:e5:51 a
Associated wirelessint-wpa2 00:1a:1e:87:ef:f1 a
Associated wirelessint-wpa2 00:1a:1e:87:ef:f1 a
Associated wirelessint-wpa2 00:1a:1e:85:c2:11 a-HT
The output of this command includes the following parameters:
Parameter
IP
MAC
Name
Current Switch
Role
Age
1004 | show-global-user-table list
Description
Show users that satisfy any of the given criteria
Number of rows to show
Sort the list based on a specified criteria, in ascending or descending order
Show user table starting from a specific row
MAC
Name
------------
------
00:23:6c:80:3d:bc
madisonQ employee
00:05:4e:45:5e:c8
CorpNetwork2 employee
00:14:a5:30:c2:7f
fdedhia
00:1b:77:c4:a2:fa
CorpNetwork2 employee
00:21:5c:02:16:bb
melindayao employee
Description
IP address of user.
MAC address of user.
User name.
IP address of the switch where the user is currently associated.
User role.
User age, displayed as days:hours:minutes .
Role
Age(d:h:m)
----
----------
01:05:50
00:02:22
employee
01:20:09
00:02:18
00:05:40
default
default
default
default
default
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Auth
VPN link
AP
----
--------
---
802.1x
802.1x
802.1x
802.1x
802.1x
---------- --- -----