Dell PowerConnect W-7200 Series Reference Manual page 876

Column
ID
Cfreq
Bandwidth
Channels-
affected
Signal-strength
Duty-cycle
Add-time
Delete-time
Related Commands
Command
ap spectrum local-override
rf dot11a-radio-profilemodespectrum-
mode
rf dot11g-radio-profilemodespectrum-
mode
Command History
Introduced in ArubaOS 6.0.
Command Information
Platforms
All platforms
876 | show ap spectrum device-history
Description
ID number assigned to the device by the spectrum monitor or hybrid AP radio. Spectrum monitors
and hybrid APs assign a unique spectrum ID per device type.
Center frequency of the signal sent from the device.
Channel bandwidth used by the device, in Kilohertz.
Radio channels affected by the wireless device, in Kilohertz.
Strength of the signal sent from the device, in dBm.
Device duty cycle. This value represents the percent of time the device broadcasts on the
specified channel or frequency.
Time at which the device was first detected.
Time at which the device was aged out.
Description
Convert an AP or AM into a spectrum
monitor by adding it to the spectrum local-
override list.
Set a 802.11a radio so the device operates
as an spectrum monitor, and can send
spectrum analysis data to a desktop or
laptop client.
Set a 802.11g radio so the device operates
as an spectrum monitor, and can send
spectrum analysis data to a desktop or
laptop client.
Licensing
Base operating system
Command Mode
Enable or Config mode on master or local controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Mode
Config mode on master or local
controllers
Config mode on master or local
controllers
Config mode on master or local
controllers