Dell PowerConnect W-7200 Series Reference Manual page 806

show ap monitor
show ap monitor active-laser-beams|ap-list|channel|client-list|containment-info|ids-
state|mesh-list|pot-ap-list|pot-client-list|routers|wired-mac {ap-name <ap-name>}|{bssid
<bssid>}|{ip-addr <ip-addr>} {ap-bssid <ap-bssid>}|{enet-mac <enet-mac>}
Description
Show information for Dell Air Monitors.
Syntax
Parameter
active-laser-beams
ap-list
arp-cache
channel
client-list
containment-info
ids-state
806 | show ap monitor
Description
Show active laser beam generators.
The output of this command shows a list of all APs that are actively performing policy
enforcement containment such as rogue containment. This command can tell us which AP
is sending out deauthorization frames, although it does not specify which AP is being
contained.
Show list of APs being monitored.
Show ARP Cache of learned IP to MAC binding
Show state and stats of a specific channel.
Show list of client being monitored.
Show containment events and counters triggered by the wired containment and wireless
containment features configured in the
shows device and target data for wired containment activity, a well as data for the
following counters.
Wireless Containment Counters:
Last Deauth Timer Tick
l
Deauth frames to AP
l
Deauth frames to Client
l
Last Tarpit Timer Tick
l
Tarpit Frames: Probe Response
l
Tarpit Frames: Association Response
l
Tarpit Frames: Authentication
l
Tarpit Frames: Data from AP
l
Tarpit Frames: Data from Client
l
Last Enhanced Adhoc Containment Timer Tick
l
Enhanced Adhoc Containment: Frames To Data Sender
l
Enhanced Adhoc Containment: Frames To Data Receiver
l
Enhanced Adhoc Containment: Response to Request
l
Enhanced Adhoc Containment: Replay Response
l
Wired Containment Counters:
Last Wired Containment Timer Tick
l
Last Tagged Wired Containment Timer Tick
l
Spoof frames sent
l
Spoof frames sent on tagged VLAN
l
Show IDS State.
ids general-profile. The output of this command
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide