Dell PowerConnect W-7200 Series Reference Manual page 1231

show rf dot11g-radio-profile
show rf dot11g-radio-profile [<profile>]
Description
Show an 802.11g Radio profile.
Syntax
Parameter
<profile>
Usage Guidelines
Issue this command without the <profile>parameter to display the entire 802.11g profile list, including profile
status and the number of references to each profile. Include a profile name to display detailed configuration
information for that profile.
Examples
The example below shows that the controller has four configured 802.11g profiles. The References column lists the
number of other profiles with references to the 802.11g profile, and the Profile Status column indicates whether the
profile is predefined. User-defined profiles will not have an entry in the Profile Status column
(host) # show rf arm-profile
Adaptive Radio Management (ARM) profile List
--------------------------------------------
Name
----
airwave
default
no-scanning
nokia-rf-profile
Total:4.
This example displays the configuration settings for the profile airwave.
(host) # show rf dot11g-radio-profile default
Parameter
---------
Radio enable
Mode
High throughput enable (radio)
Channel
Beacon Period
Beacon Regulate
Transmit EIRP
Advertise 802.11d and 802.11h Capabilities
TPC Power
Spectrum load balancing
Spectrum Load balancing mode
Spectrum load balancing update interval (sec)
Advertised regulatory max EIRP
Spectrum Load Balancing domain
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Name of a 802.11g profile.
References Profile Status
---------- --------------
4
4
1
1
Value
-----
Enabled
ap-mode
Enabled
N/A
100 msec
Disabled
15 dBm
Disabled
15 dBm
Disabled
channel
30 seconds
0
N/A
show rf dot11g-radio-profile | 1231