Dell PowerConnect W-7200 Series Reference Manual page 649

Parameter
ACE count
Name
Applied
Total free ACE entries
Free ACE entries at the
bottom
Next ACE entry to use
ACE entries reused
ACL count
Tunnel ACL
The following example displays the ACL table for ACL 1.
(host) #show acl ace-table acl 1
Acl Table
--------
ACL Type ACE Index
--- ---- ---------
1 role 1020
Total free ACE entries = 3591
Free ACE entries at the bottom = 2991
Next ACE entry to use = 1041 (table 1)
Ace entries reused 373 times
ACL count 64, tunnel acl 0
Related Commands
Configure ACLs using the command
Command History
This command was available in ArubaOS 3.0.
Command Information
Platforms
All platforms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Number of access control entries in the ACL
Name of the access control list
Number of times the ACL was applied to a role.
The total number of free ACE entries. This includes available ACE entries at the bottom
of the list, as well as free ACE entries in the middle of the table from previous access list
entries that were later removed.
The total number of free ACE entries at the bottom of the list.
Ace number of the first free entry at the bottom of the list.
For internal use only.
Total number of defined ACLs
Total number of defined tunnel ACLs.
Ace Count Name Applied
--------- ---- -------
18 logon 0
ip access-list session.
Licensing
Base operating system
Command Mode
Enable and Config mode on master controllers
show acl acl-table | 649