Dell PowerConnect W-7200 Series Reference Manual page 952

Arubaos 6.2
Hide thumbs Also See for PowerConnect W-7200 Series:
Table of Contents

Advertisement

Syntax
Parameter
acl id <id-name>
ap-name <ap-name>
ip-addr <ip-address>
application counters
ap-name <ap-name>
ip-addr <ip-address>
bridge
ap-name <ap-name>
counters
ip-addr <ip-address>
table <macaddr>
bwm table
cp-bwm
crypto counters
debug
dma counters
eap
opcode
performance
pkttrace-buffer
trace-buffer
952 | show datapath
Description
Displays datapath statistics associated with a specified ACL. The ACL index is
found in the show rights command.
Name of the AP.
IP address of the AP
Shows application counters and errors generated by applications running on a
particular AP. These include stateful firewall application layer statistics.
Name of the AP.
IP address of the AP.
Shows bridge table entry statistics including MAC address, VLAN, assigned VLAN,
Destination and flag information for an AP.
Name of the AP. Shows MAC address, VLAN, assigned VLANs, destination and
flags information.
Shows datapath bridge table statistics such as current entries, high water mark,
maximum entries, total entries, allocation failures and max link length.
IP address of the AP. Shows MAC address, VLAN, assigned VLANs, destination
and flags information.
Displays the current high, maximum, and total number of bridge table entries for
the Dell controller.
Shows bandwidth management table entry statistics such as CPU, contract,
Bits/sec, policed, available bytes, queued bytes and packets.
Displays the data path CP bandwidth management table information.
Displays crypto parameter statistics including crypto, IPsec, PPTP, WEP, TKIP,
AESCCM encryption and decryptions, WEP CRC, crypto hardware, XSEC, DOT1X
and L2TP information.
Displays datapath debug details. These are low-level datapath details.
DMA counters are displayed.
EAP termination statistics displayed.
Displays datapath debugging information. Use this command only under the
supervision of Dell technical support.
Datapath performance counters. By default, combined statistics of all CPUs are
shown.
Packet trace buffer statistics.
Debug trace-buffer tables are displayed.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powerconnect w-series

Table of Contents