Dell PowerConnect W-7200 Series Reference Manual page 842

vlan-id tunnel-id
------- ---------
65 0x10c4
65 0x1072
The output of this command includes the following information:
Column
Name
bssid
mac
auth
assoc
aid
1-int
essid
vlan-id
tunnel-id
assoc. time
num assoc
flags
Command History
Introduced in ArubaOS 5.0.
Command Information
Platforms
All platforms
842 | show ap remote debug association
phy assoc. time
--- -----------
a-HT-40sgi-2ss 35m:41s
a 24m:29s
Description
Name of an AP
The AP Basic Service Set Identifier (BSSID)
MAC address of the AP
This column displays a y if the AP has been configured for 802.11 authorization frame types.
Otherwise, it displays an n.
This column displays a y if the AP has been configured for 802.11 association frame types.
Otherwise, it displays an n.
802.11 association ID. A client receives a unique 802.11 association ID when it associates to
an AP.
Number of beacons in the 802.11 listen interval. There are ten beacons sent per second, so
a ten-beacon listen interval indicates a listen interval time of 1 second.
Name that uniquely identifies the AP's Extended Service Set Identifier (ESSID).
Identification number of the AP's VLAN.
Identification number of the AP's tunnel.
Amount of time the client has associated with the AP, in the format hours:minutes:seconds .
Number of clients associated with the AP.
This column displays any flags for this AP. The list of flag abbreviations is included in the
output of the show ap association command.
Licensing
Base operating system
num assoc Flags
--------- -----
1 WA
1 WA
Command Mode
Enable or Config mode on master controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide