Dell PowerConnect W-7200 Series Reference Manual page 1226

show rf dot11a-radio-profile
show rf dot11a-radio-profile [<profile>]
Description
Show an 802.11a Radio profile.
Syntax
Parameter
<profile>
Usage Guidelines
Issue this command without the> <profileparameter to display the entire 802.11a Radio profile list, including
profile status and the number of references to each profile. Include a profile name to display detailed configuration
information for that profile.
Examples
The example below shows that the controller has three configured 802.11a Radio profiles. The References column
lists the number of other profiles with references to the 802.11a Radio profile, and the Profile Status column
indicates whether the profile is predefined. User-defined profiles will not have an entry in the Profile Status column.
(host) # show rf dot11a-radio-profile
802.11a radio profile List
--------------------------
Name
----
default
default-AP85
test
Total:3.
This example displays the configuration settings for the profile default.
(host) # show rf dot11a-radio-profile default
802.11a radio profile "default"
-------------------------------
Parameter
---------
Radio enable
Mode
High throughput enable (radio)
Channel
Beacon Period
Beacon Regulate
Transmit EIRP
Advertise 802.11d and 802.11h Capabilities
TPC Power
Spectrum load balancing
Spectrum Load balancing mode
Spectrum load balancing update interval (sec)
Spectrum load balancing threshold (%)
Advertised regulatory max EIRP
1226 | show rf dot11a-radio-profile
Description
Name of an 802.11a profile.
References Profile Status
---------- --------------
18
1
1
Value
-----
Enabled
ap-mode
Enabled
149+
100 msec
Disabled
15 dBm
Disabled
15 dBm
Disabled
channel
30 seconds
20 percent
0
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide