Dell PowerConnect W-7200 Series Reference Manual page 739

Parameter
Voice aware Scan
Rejects
Scan Success
EIRP
MAX EIRP
UAPSD Flush STA Wake
UAPSD SP Set
UASPD Dup Trig
UAPSD Recv frame for TX
UAPSD Ageout Drain
UAPSD TX proc comp
UAPSD SP In prog
UAPSD QOS NULL TX
UAPSD TX HW Queued
UAPSD SP Reset
Frames Rcvd For TX
Tx Frames Dropped
Frames Transmitted
PS Unicast
DTIM Broadcast
Success With Retry
Tx Mgmt Frames
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Rejects parameter shows the number of times the AP has rejected a scan because of the
power-save aware scan feature.
If you enable the VoIP Aware Scan feature in the AP's ARM profile, the AP will not
attempt to scan a different channel if one of its clients has an active VoIP call. This Voice
aware scan Rejects parameter shows the number of times the AP has rejected a scan
because of the Voip aware scan feature.
Number of successful scans. To view scan details, use the command
scan-times.
The value of this parameter is the transmission power level (in dBm) + the antenna gain
value.
The max EIRP depends on AP capability and the regulatory domain constraint for the
channel of operation. For example, in the US, Channels 36-48 have max EIRP of 23dBm
Number of times a client wakes from power-save mode and flushes the UAPSD queue.
The number of unique UAPSD Scheduled Period is started in response to UAPSD trigger
frames.
The number of times duplicate UAPSD trigger frames are received (i.e., retried UAPSD
triggers that were received by the AP more than once).
The number of frames received for transmission over the air interface using UAPSD
The number of time UAPSD queue is drained (i.e. frames are dropped) due to ageout.
The number of UAPSD frames that were successfully transmitted
The number of times a trigger frame was received while a Scheduled Period (SP) was
already in progress based on an earlier trigger frame.
The number of times the AP had to respond with a QoS Null Data frame in response to a
UAPSD trigger because AP did not have Data frame queued for that client
The number of frames (Data and Null Data) that were transferred to the radio HW for
transmission, in response to UAPSD triggers.
The number of times the UAPSD Scheduled Period (SP) in progress is reset or cancelled.
Number of frames received for transmission.
Number of transmission frames that were dropped.
Number of frames successfully transmitted.
Number of power save unicast frames
Number of broadcast frames with DTIM values.
Number of frames that were transmitted after being retried.
Number of management frames transmitted.
show ap arm
show ap debug radio-stats | 739