Dell PowerConnect W-7200 Series Reference Manual page 997

show firewall-visibility
show firewall-visibility {debug|status}
Description
Displays the policy enforcement firewall visibility process state and status information.
Syntax
Parameter
debug
status
Example
The output of this command shows the status of firewall visibility.
(host) #show firewall-visibility status
enabled
Command History
This command is introduced in ArubaOS 6.2.
Command Information
Platforms
W-3200, W-3400, W-3600, W-
6000M3, and W-7200 series
controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Displays process state information for debugging firewall visibility.
Displays the status of firewall visibility as enabled or disabled.
Licensing
This command requires the PEFNG
license
Command Mode
Config or Enable mode on master or local
controller
show firewall-visibility | 997