Dell PowerConnect W-7200 Series Reference Manual page 1189

show profile-errors
show profile-errors
Description
Displays the list of invalid user-created profiles.
Syntax
No parameters.
Example
The output of this command shows list of profiles that are invalid and also displays the error in those profiles. In this
example, the VLAN 1000 that is mapped to a virtual-ap that does not exist.
(host) #show profile-errors
Invalid Profiles
----------------
Profile
-------
wlan virtual-ap "test-vap"
The following are the list of some profile errors:
Error
Named VLAN [named_VLAN] is removed
Named VLAN [named_VLAN] is not mapped
Named VLAN [named_VLAN] is invalid
VLAN [x] does not exist
Server group is invalid
User derivation rule is invalid
User role is invalid
Controller country code is undefined
Country [country_name] does not match
controller country [country_name]
Opmode requires WPA key
WARNING: if weptxkey = [x], wepkey[x] must
be set in order to use static WEP
Command History
This command was available in ArubaOS 3.0
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Error
-----
VLAN 1000 does not exist
Description
These errors are displayed if a virtual AP profile is configure
with a VLAN that does not exist.
This error is displayed if an AAA profile is configured an
invalid server group.
This error is displayed if a user role in an AAA profile is
invalid.
These errors are displayed, if your controller is not set to the
correct country code or if the country code specified in a
WLAN profile does not match the controller's country code.
This message is displayed if a SSID profile is configured
without a WPA key.
This message is displayed if a SSID profile is configured to
use a static WEP and the WEP is not configured.
show profile-errors | 1189