Dell PowerConnect W-7200 Series Reference Manual page 1154

show master-redundancy
show master-redundancy
Description
Display the master controller redundancy configuration.
Syntax
No parameters.
Example
This example below shows the current master redundancy configuration, including the ID number of the master
VRRP virtual router and the IP address of the peer controller for master redundancy.
(host) #show master-redundancy
Master redundancy configuration:
VRRP Id 2 current state is MASTER
Peer's IP Address is 2.1.1.4
Related Commands
Command
master-redundancy master-vrrp
vrrp
Command History
This command was introduced in ArubaOS 3.0.
Command Information
Platforms
All platforms
1154 | show master-redundancy
Description
This command associates a VRRP instance with master controller redundancy.
This command configures the Virtual Router Redundancy Protocol (VRRP).
Licensing
Base operating system
Command Mode
Enable and Config mode on master controllers.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide