Dell PowerConnect W-7200 Series Reference Manual page 1084

show ip radius
show ip radius nas-ip|source-interface
Description
Display global parameters for configured RADIUS servers.
Syntax
Command
nas-ip
source-interface
Examples
The example below shows the RADIUS client NAS IP address.
(host) #show ip radius nas-ip
RADIUS client NAS IP address = 10.168.254.221
Related Commands
Command
ip radius
Command History
Introduced in ArubaOS 3.0.
Command Information
Platforms
All platforms
1084 | show ip radius
Description
Show the Network Access Server (NAS) IP address attribute sent in outgoing RADIUS
requests
Show the source address of outgoing RADIUS requests
Description
This command configures global parameters for configured RADIUS
servers.
Licensing
Base operating system
Command Mode
Available in Config or Enable mode on master
or local controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide