Dell PowerConnect W-7200 Series Reference Manual page 1349

Parameter
Remote Sequence
Number
Null Update Count
Related Commands
Command
whitelist-db cpsec-local-switch-list
Command History
Version
ArubaOS 5.0
ArubaOS 6.0
Command Information
Platforms
All platforms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
master controller.
The number of times that the master controller has received and acknowledged a campus
AP whitelist change from the local controller in the whitelist. In the example above, the
master controller received and acknowledged a single campus AP whitelist change from
the local controller with the MAC address 00:0b:86:51:a5:4c.
The number of times the controller has checked its control plane security whitelist and
found nothing to synchronize with the remote controller. By default, the controller
compares its control plane security whitelist against whitelists on other controllers every
minute. If the null update count reaches 5, the controller will send an "empty sync"
heartbeat to the remote controller to ensure the sequence numbers on both controllers are
the same, then reset the null update count to zero.
Description
Configure the local controller whitelist for the control plane
security feature.
Modification
Command introduced
The cpsec-local-ctrlr-list parameter was modified to cpsec-local-switch-list
Licensing
Base operating system
Mode
Config mode
Command Mode
Config mode on master controllers
show whitelist-db cpsec-local-switch-list | 1349