Dell PowerConnect W-7200 Series Reference Manual page 672

show ap arm scan-times
show ap arm scan-times {ap-name <ap-name>|bssid <bssid>|ip-addr <ip-addr>}
Description
Show AM channel scan times for an individual AP.
Syntax
Parameter
ap-name <ap-name>
bssid <bssid>
ip-addr <ip-addr>
Examples
The output of this command shows scan times for every channel on an AP with the IP address 10.15.10.37.
(host)# show ap arm scan-times ip-addr 10.15.10.37
Channel Scan Time
-----------------
channel assign-time
------- -----------
36 8579
40 2365
44 2495
48 9714
52 0
56 0
60 0
64 0
149 5546
153 2310
157 6094
161 3014
165 10538
1 4194
2 0
3 0
4 0
5 0
6 4076
7 0
8 0
9 0
10 0
11 3710
D: Default, V: Valid, A: AP Present, C: Reg Domain Channel, O: DOS Channel, T:20MHZ Channel,
F: 40MHz Channel, L: Reg Domain 40MHz Channel (lower), U:
Reg Domain 40MHz channel (U)
672 | show ap arm scan-times
Description
Show channel scan data for an AP with a specific name.
Show channel scan data for a specific Basic Service Set Identifier (BSSID) on an AP. An AP's
BSSID is usually the AP's MAC address.
Show channel scan data for an AP with a specific IP address. Enter the IP address in dotted-
decimal format.
scans-attempted scans-rejected
--------------- --------------
349 0
349 0
349 0
349 0
349 0
349 0
348 0
348 0
348 0
348 0
348 0
348 0
348 0
97 0
97 0
97 0
97 0
97 0
97 0
96 0
97 0
97 0
97 0
97 0
dos-scans flags timer-tick
--------- ----- ----------
0 DVACT 50598
0 DVACT 50610
0 DVACT 50621
0 DVACT 50656
0 DA 50643
0 DA 50655
0 DA 50519
0 DA 50530
0 DVACT 50542
0 DVACT 50553
0 DVACT 50565
0 DVACT 50576
0 DVACT 50587
0 DVACT 50594
0 DAC 50604
0 DAC 50615
0 DAC 50627
0 DC 50638
0 DVACT 50656
0 DAC 50538
0 DC 50549
0 DC 50561
0 DAC 50572
0 DVACT 50583
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide