Table of Contents
Advertisement
Parameter
UAPSD OverflowDrop
TX Timeouts
Lost Carrier Events
Last SNR
Last SNR CTL0
Last SNR CTL1
Last SNR CTL2
Last SNR EXT0
Last SNR EXT1
Last SNR EXT2
Last ACK SNR
Last ACK SNR CTL0
Last ACK SNR CTL1
Last ACK SNR CTL2
Last ACK SNR EXT0
Last ACK SNR EXT1
Last ACK SNR EXT2
Frames Received
Good Frames
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
appear in the output of the command.
Tx WMM [BE]: Best Effort
Tx WMM [BK]: Background
Tx WMM [VO]: VoIP
Tx WMM [VI]: Video
Number of packets dropped due to Unscheduled Automatic Power Save Delivery
(U-APSD) overflow.
Number of transmission timeouts
Number of carrier sense timeouts.
The last recorded signal-to-noise ratio.
The signal-to-noise ratio for the last received data packet on the primary (control)
channel 0. This parameter is only displayed for APs operating in 40 Mhz mode.
The signal-to-noise ratio for the last received data packet on the secondary (control)
channel 1. This parameter is only displayed for APs operating in 40 Mhz mode.
The signal-to-noise ratio for the last received data packet on the secondary (control)
channel 2. This parameter is only displayed for APs operating in 40 Mhz mode.
Signal-to-noise ratio for the last received ACK packet on the secondary (extension)
channel 0. This parameter is only displayed for APs operating in 40 Mhz mode.
Signal-to-noise ratio for the last received ACK packet on the secondary (extension)
channel 1. This parameter is only displayed for APs operating in 40 Mhz mode.
Signal-to-noise ratio for the last received ACK packet on the secondary (extension)
channel 2. This parameter is only displayed for APs operating in 40 Mhz mode.
Signal-to-noise ratio for the last received ACK packet.
Signal-to-noise ratio for the last received ACK packet on the primary (control) channel 0.
This parameter is only displayed for APs operating in 40 Mhz mode.
Signal-to-noise ratio for the last received ACK packet on the primary (control) channel 1.
This parameter is only displayed for APs operating in 40 Mhz mode.
Signal-to-noise ratio for the last received ACK packet on the primary (control) channel 2.
This parameter is only displayed for APs operating in 40 Mhz mode.
Signal-to-noise ratio for the last received ACK packet on the secondary (extension)
channel 0. This parameter is only displayed for APs operating in 40 Mhz mode.
Signal-to-noise ratio for the last received ACK packet on the secondary (extension)
channel 1. This parameter is only displayed for APs operating in 40 Mhz mode.
Signal-to-noise ratio for the last received ACK packet on the secondary (extension)
channel 2. This parameter is only displayed for APs operating in 40 Mhz mode.
Number of frames received.
Number of frames received with no errors.
show ap debug radio-stats | 741
Advertisement
Table of Contents
