Dell PowerConnect W-7200 Series Reference Manual page 580

Configuration Option
Allow client to auto-
upgrade
VIA tunneled networks
Enable split-
tunneling
Allow client-side
logging
VIA Client WLAN
profiles
VIA IKEv2 Policy
VIA IKE Policy
Use Windows
Credentials
Enable IKEv2
Use Suite B
Cryptography
IKEv2 Authentication
method
VIA IPSec V2 Crypto
Map
VIA IPsec Crypto Map
Allow user to save
passwords
Enable Supplicant
Enable FIPS Module
Auto-Launch
Supplicant
580 | show aaa authentication via connection-profile
Description
Enable or disable VIA client to automatically upgrade when an updated version of the
client is available on the controller.
Default: Enabled
A list of network destination (IP address and netmask) that the VIA client will tunnel
through the controller. All other network destinations will be reachable directly by the VIA
client.
Enable or disable split tunneling.
If enabled, all traffic to the VIA tunneled networks will go through the controller and
l
the rest is just bridged directly on the client.
If disabled, all traffic will flow through the controller.
l
Default: off
Enable or disable client side logging. If enabled, VIA client will collect logs that can be
sent to the support email-address for troubleshooting.
Default: Enabled
A list of VIA client WLAN profiles that needs to be pushed to the client machines that use
Windows Zero Config (WZC) to configure or manage their wireless networks.
A list of IPsec crypto maps that the VIA client uses to connect to the controller. These
IPsec Crypto Maps are configured in the CLI using the crypto-local ipsec-map
<ipsec-map-name> command.
List of IKE policies that the VIA Client has to use to connect to the controller.
Enable or disable the use of the Windows credentials to login to VIA. If enabled, the SSO
(Single Sign-on) feature can be utilized by remote users to connect to internal resources.
Default: Enabled
Select this option to enable or disable the use of IKEv2 policies for VIA.
Select this option to use Suite B cryptography methods. You must install the Advanced
Cryptography license to use the Suite B cryptography.
List of all IKEv2 authentication methods.
List of all IPSec V2 that the VIA client uses to connect to the controller.
List of IPsec Crypto Map that the VIA client uses to connect to the controller. These IPsec
Crypto Maps are configured in CLI using the crypto-local ipsec-map <ipsec-
map-name> command.
Enable or disable users to save passwords entered in VIA.
Default: Enabled
If enabled, VIA starts in bSec mode using L2 suite-b cryptography. This option is disabled
by default.
Shows if the VIA (Federal Information Processing Standard) FIPS module is enabled, so
VIA checks for FIPS compliance during startup. This option is disabled by default.
Select this option to automatically connect to a configured WLAN network.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide