Related Commands - Dell PowerConnect W-7200 Series Reference Manual

Parameter
Age Out: Generic Frequency Hopper

Related Commands

rf spectrum-profile
Command History
Release
ArubaOS 6.0
ArubaOS 6.2
Command Information
Platforms
All platforms
1246 | show rf spectrum-profile
Modification
Command introduced
The spectrum-band parameter was deprecated.
The following default ageout times were changed:
cordless-fh-base default timeout is 240 seconds (was 25 seconds in previous releases).
l
cordless-fh-network default timeout is 60 seconds (was 10 seconds in previous releases).
l
generic-interferer default timeout is 30 seconds (was 25 seconds in previous releases).
l
video default timeout is 60 seconds (was 10 seconds in previous releases).
l
Licensing
Base operating system.
Description
that device no longer active on the network. The default value is 240
seconds.
The number of seconds for which a generic frequency-hopping device
must stop sending a signal before the spectrum monitor considers that
device no longer active on the network. The default value is 25 seconds.
Command Mode
Config mode on master and local controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide