Dell PowerConnect W-7200 Series Reference Manual page 665

show ap ap-group
show ap ap-group {ap-name <ap-name>|bssid <bssid>|ip-addr <ip-addr>}
Description
Show the AP group settings for an individual AP.
Syntax
Parameter
ap-name <ap-name>
bssid <bssid>
ip-addr <ip-addr>
Usage Guidelines
Use this command to display the contents of an AP's group profile. If you know the name of the group whose profile
settings you want to view, use the command show ap-group <profile-name>. To view a list of all configured AP
groups on your controller, use the command show ap-group.
Examples
In the example below, the output of this command lists the profiles associated with the AP group Corp13.
(host) #show ap ap-group AP2
AP group "corp13"
-------------------
Parameter
---------
Virtual AP
Virtual AP
Virtual AP
Virtual AP
802.11a radio profile
802.11g radio profile
Wired AP profile
Ethernet interface 0 link profile
Ethernet interface 1 link profile
AP system profile
VoIP Call Admission Control profile
802.11a Traffic Management profile
802.11g Traffic Management profile
Regulatory Domain profile
SNMP profile
RF Optimization profile
RF Event Thresholds profile
IDS profile
Mesh Radio profile
Mesh Cluster profile
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Show data for an AP with a specific name.
Show data for a specific Basic Service Set Identifier (BSSID). An AP's BSSID is usually the
AP's MAC address.
Show data for an AP with a specific IP address. Enter the IP address in dotted-decimal
format.
Value
-----
corp13-guest
corp13-ether-wpa2
corp13-ether-voip
corp13-ether-comm
default
default
default
default
default
corp13
default
N/A
N/A
corp13-channel-profile
default
handoff-aggressive
default
ids-low-setting
default
N/A
show ap ap-group | 665