Dell PowerConnect W-7200 Series Reference Manual page 630

Parameter
Idled users from STM timeout
tunnel
dtunnel
Idled users from STM
other
Logon lifetime
iteration
SIP authentication
message
Missing auth user
deletes
Mobility Stats
Captive-portal
forced user deletes
Auth User Rejects Received
L2 User
IPv4
IPv6
Auth User Rejects Processed
L2 User
IPv4
IPv6
Command History
Release
ArubaOS 3.0
630 | show aaa state debug-statistics
Description
Number of users in tunnel forwarding mode that aged out after the STM timer expired.
Number of users in decrypt tunnel forwarding mode that aged out after the STM timer
expired.
Number of users in fowarding modes other than decrypt tunnel or tunnel mode that aged
out after the STM timer expired.
Number of users deleted for lack of activity.
Number of session initiation protocol (SIP) authentication messages received.
Number of users removed from the datapath by the auth module, even without a mapping
entry in control path. This counter can help identify problems with messages sent between
the controlpath and the datapath.
Number of different messages exchanged between the mobile IP and the auth module.
NOTE: This is used for troubleshooting purposes only.
Number of idle users deleted after captive portal authentication.
Number of authentication rejects received for L2 users from the datapath due to a failure of
the operation.
Number of authentication rejects received for IPv4 users from the datapath due to a failure
of the operation.
Number of authentication rejects received for IPv6 users from the datapath due to a failure
of the operation.
Number of authentication rejects for L2 users that were processed after the reject was
received.
Number of authentication rejects for IPv4 users that were processed after the reject was
received.
Number of authentication rejects for IPv6 users that were processed after the reject was
received.
Modification
Command introduced
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide