Dell PowerConnect W-7200 Series Reference Manual page 523

Parameter
mgmt-frame-throttle-
interval
mgmt-frame-throttle-limit
mode
ap-mode
am-mode
spectrum-mode
no
radio-enable
slb-mode channel|radio
slb-update-interval
<secs>
spectrum-load-bal-domain
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
supported maximum, the maximum supported
value will be used instead. Values below 600m will
use default settings.
Averaging interval for rate limiting management
frames in seconds. Zero disables rate limiting.
Note: This parameter only applies to AUTH and
ASSOC/RE-ASSOC management frames.
Maximum number of management frames allowed
in each throttle interval.
NOTE: This parameter only applies to AUTH and
ASSOC/RE-ASSOC management frames.
One of the operating modes for the AP.
Device provides transparent, secure, high-speed
data communications between wireless network
devices and the wired LAN.
Device behaves as an air monitor to collect
statistics, monitor traffic, detect intrusions, enforce
security policies, balance traffic load, self-heal
coverage gaps, etc.
Device operates as an spectrum monitor, and can
send spectrum analysis data to a desktop or laptop
client.
This parameter is only available for AP models W-
AP92, W-AP93, W-AP105, W-AP175 series, W-
AP120 series, and the W-AP130 series.
Negates any configured parameter.
Enables or disables radio configuration.
SLB Mode allows control over how to balance
clients. Select one of the following options
channel: Channel-based load-balancing
l
balances clients across channels. This is the
default load-balancing mode
radio: Radio-based load-balancing balances
l
clients across APs
Specify how often spectrum load balancing
calculations are made (in seconds). The default
value is 30 seconds.
Define a spectrum load balancing domain to
manually create RF neighborhoods.
Use this option to create RF neighborhood
information for networks that have disabled
Adaptive Radio Management (ARM) scanning and
channel assignment.
If spectrum load balancing is enabled in a
l
802.11a radio profile but the spectrum load
balancing domain is not defined, ArubaOS
uses the ARM feature to calculate RF
Range Default
0-60 1 second
interval
0-999999 20 frames
per interval
ap-mode
— —
— enabled
channel
1-2147483647 30 seconds
seconds
— —
rf dot11a-radio-profile | 523