Dell PowerConnect W-7200 Series Reference Manual page 1350

show whitelist-db cpsec-master-switch-list
show cpsec-master-ctlr-list-db cpsec
show whitelist-db cpsec-master-switch-list [mac-address <mac-address>]
Description
Display the master switch list whitelist on local controllers with APs using the control plane security feature.
Syntax
Parameter
mac-address <mac-address>
Usage Guidelines
When you use the control plane feature on a network with both master and local controllers, each local controller has
a master switch whitelist which contains the IP and MAC addresses of its master controller. If your network has a
redundant master controller, then this whitelist will contain more than one entry.
To view information for a single master controller, use the command show whitelist-db cpsec-master-switch-list
mac-address <mac-address>. To view a list of all master controllers, use the command show whitelist-db cpsec-
master-switch-list.
Example
The following command shows that the local controllers have a single master controller with the IP address 10.3.53.3:
(host) #show whitelist-db cpsec-master-list
Registered Master Switch Details
------------------------------------
MAC-Address
-----------
00:0b:86:61:21:c8
Whitelist Entries: 1
The output of this command includes
Syntax
Parameter
MAC-Address
IP-Address
Sequence Number
Remote Sequence
1350 | show whitelist-db cpsec-master-switch-list
Description
MAC address of the master controller.
IP-Address Sequence Number
----------
10.3.53.3 1
Description
MAC address of the master controller.
IP address of the master controller.
The number of times the master controller in the whitelist received and acknowledged a
campus AP whitelist change from the local controller. In the example above, the master
controller received and acknowledged one campus AP whitelist change from the local
controller.
The number of times that the local controller has received and acknowledged a campus
Remote Sequence Number
--------------- ----------------------
3
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
NULL Update Count
-----------------