Dell PowerConnect W-7200 Series Reference Manual page 900

show ap wired-ap-profile
show ap wired-ap-profile [<profile>]
Description
Show a list of all wired AP profiles, or display the configuration parameters in a specific wired AP profile.
Syntax
Parameter
<profile>
Usage Guidelines
The command show ap wired-ap-profile displays a list of all wired AP profiles, including the number of references to
each profile and the profile status. If you include the optional <profile> parameter, the command will display
detailed information for that one profile.
Example
The output of this command shows the configuration parameters for the wired AP profile "default".
(host) #show ap wired-ap-profile default
Wired AP profile "default"
--------------------------
Parameter
---------
Wired AP enable
Forward mode
Switchport mode
Access mode VLAN
Trunk mode native VLAN
Trunk mode allowed VLANs
Trusted
Broadcast
The output of this command includes the following information:
Column
Wired AP enable
Forward mode
Switchport mode
900 | show ap wired-ap-profile
Description
Name of a wired AP profile.
Value
-----
Disabled
tunnel
access
1
1
1-4094
Not Trusted
Broadcast
Description
Indicates whether the wired AP profile is enabled or disabled.
The configured forward mode for the profile.
bridge: Bridge locally
l
split-tunnel: Tunnel to controller or NAT locally
l
tunnel: Tunnel to controller
l
The profile's switching mode.
access: Set access mode characteristics of the interface.
l
mode: Set trunking mode of the interface.
l
trunk: Set trunk mode characteristics of the interface.
l
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide