Dell PowerConnect W-7200 Series Reference Manual page 589

--------------------------------------
Parameter
---------
Default Role
Server Group
Logon wait minimum wait
Logon wait maximum wait
logon wait CPU utilization threshold
WISPr Location-ID ISO Country Code
WISPr Location-ID E.164 Country Code
WISPr Location-ID E.164 Area Code
WISPr Location-ID SSID/Zone
WISPr Operator Name
WISPr Location Name
The output of this command includes the following parameters:
Parameter
Default Role
Server Group
Logon wait minimum wait
Logon wait maximum wait
WISPr Location-ID E.164 Area Code
WISPr Location-ID E.164 Country
Code 1
WISPr Location-ID ISO Country Code
WISPr Location-ID SSID/Zone
WISPr Location Name
WISPr Operator Name
Related Commands
Command
aaa authentication wispr
Command History
This command was introduced in ArubaOS 3.4.1.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Value
-----
guest
default
5 sec
10 sec
60 %
US
1
408
Corp1
MyCompany
Sunnyvale
Description
The default role to be assigned to users that have completed WISPr
authentication.
The name of the server group that performs the authentication.
If the controller's CPU utilization has surpassed the Login wait CPU
utilization threshold value, the Logon wait minimum wait parameter
defines the minimum number of seconds a user will have to wait to
retry a login attempt. Range: 1-10 seconds. Default: 5 seconds.
If the controller's CPU utilization has surpassed the logon wait CPU
utilization threshold value, the Logon wait maximum wait parameter
defines the maximum number of seconds a user will have to wait to
retry a login attempt. Range: 1-10 seconds. Default: 10 seconds.
The E.164 Area Code in the WISPr Location ID.
The 1-3 digit E.164 Country Code in the WISPr Location ID.
The ISO Country Code in the WISPr Location ID.
The SSID/network name in the WISPr Location ID.
A name identifying the hotspot location. If no name is defined, the
default ap-name is used.
A name identifying the hotspot operator.
Description
Configure WISPr authentication values on your
controller.
Mode
Config mode on master or local
controllers.
show aaa authentication wispr | 589