Dell PowerConnect W-7200 Series Reference Manual page 1081

(host) # show ip ospf interface vlan 10
Vlan 3 is up, line protocol is up
Internet Address 3.3.3.1, Mask 255.255.255.0, Area 10.1.1.1
Router ID 10.4.131.227, Network Type BROADCAST, Cost: 1
Transmit Delay is 1 sec, State WAIT, Priority 1
Designated Router id 0.0.0.0, Interface Address 3.3.3.1
Backup designated Router id 0.0.0.0, Interface Address 3.3.3.1
Timer intervals configured, Hello 10, Dead 40, Retransmit 5
Neighbor Count is 0
Tx Stat: Hellos 1 DbDescr 0 LsReq 0 LsUpdate 0 LsAck 0 Pkts 1
Rx Stat: Hellos 0 DbDescr 0 LsReq 0 LsUpdate 0 LsAck 0 Pkts 0
DisCd 0 BadVer 0 BadNet 0 BadArea 0 BadDstAdr 0 BadAuType 0
BadAuth 0 BadNeigh 0 BadPckType 0 BadVirtLink 0
...
The output may include some or all of the following parameters.
Parameter
Vlan <number>
Internet Address
Router ID
Transmit Delay
Designated Router
Backup Designated
Router ID
Timer intervals
configured
Neighbor Count
Tx Stat
Rx Stat
DisCd
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Identifies that the interface type and ID are up and functional.
Internet address, network mask, and area assigned to the interface.
Displays the router ID, that the network type is Broadcast, and the cost value.
Details of the transmit delay, state, and priority.
Details of the designated router ID and interface address.
Details of the backup router ID and interface address.
Details of elapse time intervals for Hello, Dead, Transmit (wait), and retransmit.
Details the number of neighbors and adjacent neighbors.
Counters and statistics for transmitted data.
Hellos: Number of transmitted hello packets. These packets are sent every hello
l
interval.
DbDescr: Number of transmitted database description packets.
l
LsReq: Number of transmitted link state request packets.
l
LsUpdate: Number of transmitted link state update packets.
l
LsAck: Number of transmitted link state acknowledgment packets
l
Pkts: Total number of transmitted packets.
l
Counters and statistics for received data.
Hellos: Number of received hello packets. These packets are sent every hello
l
interval.
DbDescr: Number of received database description packets.
l
LsReq: Number of received link state request packets.
l
LsUpdate: Number of received link state update packets.
l
LsAck: Number of received link state acknowledgment packets
l
Pkts: Total number of received packets.
l
Number of received packets that are discarded.
show ip ospf | 1081