Dell PowerConnect W-7200 Series Reference Manual page 1422

syscontact
syscontact <syscontact>
Description
This command configures the name of the system contact for the controller.
Syntax
Parameter
syscontact
Usage Guidelines
Use this command to enter the name of the person who acts as the system contact or administrator for the
controller. You can use a combination of numbers, letters, characters, and spaces to create the name. To include a
space in the name, use quotation marks to enclose the alphanumeric string. For example, to create the system
contact name Lab Technician 1, enter
To change the existing name, enter the command with a different string. The new name takes affect immediately.
To unconfigure the name, enter
Example
The following command defines LabTechnician as the system contact name:
(host) (config) #syscontact LabTechnician
Command History
This command was introduced in
Command Information
Platforms
All platforms
1422 | syscontact
Description
An alphanumeric string that specifies the name of the system contact.
"Lab Technician 1"
at the prompt.
""
ArubaOS 3.1.
Licensing
Base operating system
at the prompt.
Command Mode
Config mode on master controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide