Dell PowerConnect W-7200 Series Reference Manual page 767

Arubaos 6.2
Hide thumbs Also See for PowerConnect W-7200 Series:
Table of Contents

Advertisement

Column
Num Matches
Num Mismatches
Bad Checksums
Image Load Status
Command History
Introduced in ArubaOS 3.0.
Command Information
Platforms
All platforms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Number of times the running image version matched the flash image version after a
reboot.
Number of times the running image version did not match the flash image version
after a reboot. If the images do not match, the AP will upgrade to the flash image.
Number of bad checksum calculations due to an invalid or corrupted image file.
Current status of the AP following an upgrade.
Done: This status indicates that the controller reset after the upgrade was
performed, or the upgrade was performed after the AP first registered with the
controller.
Completed: The AP was updated after it was registered to the controller, and after
the controller's last reset. If AP shows a status of completed, it will also display the
time it took it update that AP.
In progress: The AP is currently updating its image.
Licensing
Base operating system
Command Mode
Enable or Config mode on master controllers
show ap image version | 767

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powerconnect w-series

Table of Contents