Dell PowerConnect W-7200 Series Reference Manual page 1003

show-global-user-table list
show global-user-table list
current-switch] <IP address>
authentication-method] {dot1x | mac | stateful-dot1x | vpn | web}
role <role name>
bssid <bssid MAC>
devtype <device>
essid <essid>
ap-name <AP name>
phy-type a|b|g
age <starting time dd:hh:mm> <ending time dd:hh:mm>
not
or
rows
sort {sort_by_ap-name | sort_by_authtype | sort_by_bssid | sort_by_current-switch | sort_
by_essid | sort_by_ip | sort_by_mac | sort_by_name | sort_by_phy-type | sort_by_role}{asc
| desc}
start
Description
This command displays a list of current users on a specified switch.
Syntax
Parameter
current-switch
authentication-
method
role
bssid
essid
ap-name
phy-type
age
current-switch
authentication-
method
role
not
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Match IP address of the switch where the user is currently associated
Count users matching the specified authentication method
Count users matching the specified role
Count users matching the specified BSSID
Count users matching the specified ESSID. If the ESSID includes spaces, you must enclose
it in quotation marks.
Count users matching the specified AP name
Count users matching the specified Phy type
Count users matching the specified age
Match IP address of the switch where the user is currently associated
Count users matching the specified authentication method
Count users matching the specified role
Show users that do not satisfy the given criteria
show-global-user-table list | 1003