Dell PowerConnect W-7200 Series Reference Manual page 903

Parameter
AP LLDP Profile
Shut Down?
Remote AP Backup
AAA Profile
Time to wait for authentication to
succeed
Command History
This command was introduced in ArubaOS 5.0.
Command Information
Platforms
All platforms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Name of an LLDP Profile associated with this wired port.
Shows if the the wired AP port is enabled (no) or disabled (yes).
Use the rap-backup parameter to use the wired port on a Remote AP for
local connectivity and troubleshooting when the AP cannot reach the
controller. If the AP is not connected to the controller, no firewall policies
will be applied when this option is enabled. (The AAA profile will be applied
when the AP is connected to controller).
Name of a AAA profile to be used by devices connecting to the AP's wired
port.
Authentication timeout value, in seconds, for devices connecting the AP's
wired port. The supported range is 1-65535 seconds, and the default value is
20 seconds.
Licensing
Base operating system
Command Mode
Enable or Config mode on master controllers
show ap wired-port-profile | 903