Dell PowerConnect W-7200 Series Reference Manual page 1398

show wms routers
show wms routers <mac>
Description
Show Learned Router Mac Information for WMS APs.
Syntax
Parameter
<mac>
Usage Guidelines
This command displays the MAC addresses of devices that have been determined to be routers by the listed APs.
This output of this command will be blank if there is not any broadcast/multicast activity in an AP's subnet.
Example
In the example below, a single WMS AP has learned MAC information for four different routers.
(host) #show wms routers
Router Mac 00:08:00:00:11:12 is Seen by APs
-------------------------------------------
AP-Name
-------
AP32
Router Mac 00:08:00:00:11:29 is Seen by APs
-------------------------------------------
AP-Name
-------
AP32
Router Mac 00:08:00:00:11:57 is Seen by APs
-------------------------------------------
AP-Name
-------
AP32
Router Mac 00:08:00:00:11:6e is Seen by APs
-------------------------------------------
AP-Name
-------
AP32
Command History
This command was introduced in ArubaOS 3.0
1398 | show wms routers
Description
MAC address of a probe that can see the router.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide