Show Crypto Ipsec Transform-Set - Dell S4810 Reference Manual

outbound
ah
esp
spi
hex-key-string
encrypt
auth
Defaults none
Command CONF-CRYPTO-POLICY
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.2(0.2)
Usage
•
Information
•

show crypto ipsec transform-set

Display the transform set configuration.
S4810
Syntax
show crypto ipsec transform-set name
Parameters
name
Command EXEC
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
828
Specify the outbound session key for IPSec.
Use the AH protocol when you select the AH transform set in
the crypto policy.
Use the ESP protocol when you select the ESP transform set
in the crypto policy.
Enter the security parameter index number.
Enter the session key in hex format (a string of 8, 16, or 20
bytes). For DES algorithms, specify at least 16 bytes per key.
For SHA algorithms, specify at least 20 bytes per key.
Indicates the ESP encryption transform set key string.
Indicates the ESP authentication transform set key string.
Introduced on the Z9000, S4810, and S4820T.
This command is only available in the ipsec-manual model.
The key information entry is associated with the global method for enabling
clear text or encrypted display in the running config.
Enter the name of the transform set.
Internet Protocol Security (IPSec)