Net Service - Dell PowerConnect W-7200 Series Reference Manual

netservice
netservice <name> <protocol>|tcp|udp {list <port>,<port>}|{<port> [<port>]}
[ALG <service>]
Description
This command configures an alias for network protocols.
Syntax
Parameter
netservice
<protocol>
tcp
udp
list <port>,
<port>
<port> [<port>]
ALG
<service>
Usage Guidelines
Aliases can simplify configuration of session ACLs, as you can use an alias when specifying the network service. Once
you configure an alias, you can use it in multiple session ACLs.
Example
The following command configures an alias for a network service:
(host) (config) #netservice HTTP tcp 80
452 | netservice
Description
Name for this alias.
IP protocol number.
Configure an alias for a TCP protocol
Configure an alias for a UDP protocol
Specify a list of non-contiguous port numbers, by entering up to six port
numbers, separated by commas.
TCP or UDP port number. You can specify a single port number, or
define a port range by specifying both the lower and upper port
numbers.
Application-level gateway (ALG) for this alias.
Specify one of the following service types:
dhcp: Service is DHCP
l
dns: Service is DNS
l
ftp: Service is FTP
l
h323: Service is H323
l
noe: Service is Alcatel NOE
l
rtsp: Service is RTSP
l
sccp: Service is SCCP
l
sip: Service is SIP
l
sips: Service is Secure SIP
l
svp: Service is SVP
l
tftp: Service is TFTP
l
vocera: Service is VOCERA
l
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Range
—
0-255
0-65535
0-65535
—