show dot1x ap-table static-wep
show dot1x ap-table static-wep
Description
Shows the static WEP keys of all APs.
Syntax
No parameters.
Example
Issue this command to display the static WEP keys of all APs.
Static-WEP Key Information
--------------------------
AP-MAC
Key1/Size
------
---------
Num APs: 0
The output of this command includes the following parameters:
Parameter
AP-MAC
Key1/Size
Key2/Size
Key3/Size
Key3/Size
Command History
This command was introduced in ArubaOS 3.0.
Command Information
Platforms
All platforms
968 | show dot1x ap-table static-wep
Key2/Size
Key3/Size
---------
---------
Description
AP's MAC address
WEP key 1 and its size
WEP key 2 and its size
WEP key 3 and its size
WEP key 3 and its size
Licensing
Base operating system
Key3/Size
---------
Command Mode
Enable or config mode on master controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide