Dell PowerConnect W-7200 Series Reference Manual page 927

show country
show country [trail]
Description
Show controller's country and domain upgrade trail.
Syntax
Parameter
trail
Usage Guidelines
A controller's country code sets the regulatory domain for the radio frequencies that the APs use. This value is
typically set during the controller's initial setup procedure. Use this command to determine the country code
specified during setup.
Example
The output of this command shows the controller's country, model and hardware types.
(host) # show country
Country:US
Model:DellW-650-US
Hardware:Restricted US
Command History
This command was available in ArubaOS 1.0.
Command Information
Platforms
All platforms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Display the record showing how the switch was reconfigured for it's current country
domain when the controller hardware was upgraded.
Licensing
Base operating system
Command Mode
Config or Enable mode on master or local
controllers
show country | 927