Dell PowerConnect W-7200 Series Reference Manual page 928

show cp-bwcontracts
show cp-bwcontract
Description
Display a list of Control Processor (CP) bandwidth contracts for whitelist ACLs.
Syntax
No parameters.
Example
The CP bw contracts table lists the contract names, the ID number assigned to each contract, and its defined traffic
rate in bits per second.
(host) #show cp-bwcontracts
CP bw contracts
---------------
Contract
--------
limit
newcontract
Related Commands
Command
cp-bandwidth-contract
firewall cp
Command History
This command was introduced in ArubaOS 3.4
Command Information
Platforms
All platforms
928 | show cp-bwcontracts
Id Rate (bits/second)
-- ------------------
4098 2000000000
4097 1000000000
Description
This command configures a bandwidth contract traffic
rate which can then be associated with a whitelist
session ACL.
This command creates a new whitelist ACL and can
associate a bandwidth contract with that ACL.
Licensing
This command requires the PEFNG
license.
Mode
Enable or Config modes
Enable or Config modes
Command Mode
Config mode on master controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide