Dell PowerConnect W-7200 Series Reference Manual page 725

Parameter
Last ACK SNR
Last ACK SNR CTL0
Last ACK SNR CTL1
Last ACK SNR CTL2
Last ACK SNR EXT0
Last ACK SNR EXT1
Frames Received
Rx Data Frames
Null Data Frames
Rx Mgmt Frames
PS Poll Frames
Rx <n> Mbps
Tx WMM
Command History
Introduced in ArubaOS 3.0.
Command Information
Platforms
All platforms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
channel 2. This parameter is only displayed for APs operating in 40 Mhz mode.
Signal-to-noise ratio for the last received ACK packet.
Signal-to-noise ratio for the last received ACK packet on the primary (control) channel 0.
This parameter is only displayed for APs operating in 40 Mhz mode.
Signal-to-noise ratio for the last received ACK packet on the primary (control) channel 1.
This parameter is only displayed for APs operating in 40 Mhz mode.
Signal-to-noise ratio for the last received ACK packet on the primary (control) channel 2.
This parameter is only displayed for APs operating in 40 Mhz mode.
Signal-to-noise ratio for the last received ACK packet on the secondary (extension) channel
0. This parameter is only displayed for APs operating in 40 Mhz mode.
Signal-to-noise ratio for the last received ACK packet on the secondary (extension) channel
1. This parameter is only displayed for APs operating in 40 Mhz mode.
Number of frames received.
Number of data frames received.
Number of null data frames received.
Number of management frames received.
Number of power save poll frames received.
Number of frames received at <n> Mbps, where <n> is a value between 6 and 300.
Number of Wifi Multimedia (WMM) packets transmitted for the following access
categories. If the AP has not transmitted packets in a category type, this data row will not
appear in the output of the command.
Tx WMM [BE]: Best Effort
Tx WMM [BK]: Background
Tx WMM [VO]: VoIP
Tx WMM [VI]: Video
Licensing
Base operating system
Command Mode
Enable or Config mode on master controllers
show ap debug client-stats | 725