Table of Contents
Advertisement
The output of this command includes the following information:
Column
Native VLAN
DHCP VLAN
DHCP ADDR
DHCP POOL NETMASK
DHCP POOL START
DHCP POOL END
DHCP DNS SERVER
DHCP ROUTER
DHCP DNS DOMAIN
DHCP LEASE
Session ACL
Session ACL name
Session ACL count
Session Aces
ACL 1
ACL1 Name
ACL1 Count
ACL1 Aces
Command History
Introduced in ArubaOS 3.0.
Command Information
Platforms
All platforms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
VLAN ID of the native VLAN.
VLAN ID of Remote AP DHCP server used when the controller is
unreachable.
IP Address used as DHCP Server Identifier.
Netmask of the DHCP server pool.
IP Address used as the start of a range of addresses for a DHCP pool.
IP Address used as the end of a range of addresses for a DHCP pool.
IP Address for the DHCP DNS server.
IP Address for the DHCP default router.
Domain name for the DHCP DNS server.
Length of DHCP DNS leases in days. If this parameter displays a zero (0)
the DHCP lease is has no defined end.
Name of the ACL applied to the user session.
Name of the ACL applied to the user session.
Number of rules in the applied to the user session.
A list of the individual rules in the session ACL.
This parameter shows the position of an individual ACL.
Name of the ACL in the first position.
Number of rules in the specified ACL.
A list of the individual rules in the specified ACL.
Licensing
Base operating system
Command Mode
Enable or Config mode on master controllers
show ap remote debug flash-config | 849
Advertisement
Table of Contents
